What You Can Do To Fix Common Toilet Problems

Have you ever experienced unpredictable toilet running? Are you searching for an emergency plumber near me? Some tricks can be used to fix problems like a toilet that doesn’t flush, leaks are noisy, or doesn’t fill up.

If homeowners encounter problems with their toilet, they can confer the manual that comes with the unit. The right thing to do if there is a problem with your plumbing is to contact a professional. It is possible to turn a mistake into a horror that will require expensive repairs in the event of negligence or mistake.

Let’s look at what you can do to fix common toilet problems while you wait for your toilet leak repair technician. Check out the blog ahead for more information.

Toilet bubbling

Your toilet may be clogged or improperly vented if air bubbles are rising from the bowl or the water level fluctuates. You may have a clogged or poor venting system causing your drain line to gasp for air. It is difficult to fix a clogged or missing vent since it usually involves breaking into the walls to examine the drain line. It is wise to leave this project to a professional unless you have the plumbing experience.

Running toilet

The flapper on a toilet can fail to seal, causing the toilet to run. The flapper is likely broken if water seeps into the bowl from the tank and around it. Make sure the fill valve is not leaking by flushing the toilet. See if the water stops flowing when the toilet tank is filling by lifting the float arm. When the water level is approximately 1/2 inch to 1 inch below the overflow pipe, bend or adjust the toilet float arm to stop the tank from filling. A new fill valve should be installed if the leak persists.

Slow toilets

A clogged rinse hole under the rim of your toilet may cause it to flush slowly due to mineral deposits. Clogged holes can be cleaned with a mirror and a coat hanger without ever putting your hands in the hole. You can check if the holes are congested by looking in the mirror. Try poking a coat hanger tip into the holes to remove mineral deposits if they are present. Seek help from a local plumber near me as soon as possible if you’re still experiencing problems.

Rocking toilet

If you don’t secure your toilet to the floor, problems may arise. Any movement of the toilet damages the wax seal. Ultimately, this results in major repairs due to leaks. If your toilet is rocking, you can slip plastic shims beneath the caulk and add shims to stabilize it. After the caulk has been applied, tighten the bolts and nuts on the toilet.

Hinges with rust

Every time the toilet seat slams, you get rust dust splattered on the toilet rim from the rusty hinge screws. Just dab a drop of clear nail polish on the screw heads to prevent this. Using caulk can help prevent the holes from rusting in the screw holes if the screws are already rusted.

Summary

Whenever you detect any of the above-mentioned problems, fix them immediately. When you fail to repair these common toilet problems on time, they could worsen and cost you a lot of money.

However, if you are unsure of anything or if the DIY fix doesn’t work, don’t hesitate to call Staton Plumbing, Heating, and Cooling for professional assistance. You can count on our experts to provide you with emergency toilet repairs when you need a plumber near me.